Edd's reverse p.a.

At A Glance Author Edd Contact ed_1943@hotmail.com Artist self done Studio my home Location midcoast Maine

Edd's reverse P.A.

I had already given myself a prince albert piercing several months before, but hungered for more. I scanned the BME pictures looking for what I thought was the best and most dramatic. Finally I narrowed it down to the reverse pa because the sight of the metal coming out the top of the glans was unbelievable to me. I couldn't believe someone could actually do that! It seemed impossible. I was afraid at first because I thought that it must hurt tremendously. I wanted it as it would be so easily visible to me and anyone who saw me. No hiding this piercing under my prick. There in all it's glory at the slightest glance. This is the one I wanted.

Since I already had the P.A. I decided to pierce from under, through the P. A.. I marked it about middle , just back a little. I had a 10G piercing needle, my largest, although I wanted to use a larger one, it would have to do. I use a piece of insulating foam to back up my pierces so that I can go right through and come out into the foam, although I wouldn't need it this time if I were to come from the bottom as I planned. I use breathing for pain control and calming, which I learned at my wife's childbirth classes. It seems to work well for me. I take cleansing breathes and then settle down and wait for my arm to stop shaking. Anyway it was hard to place the needle at the right spot inside my urethra without cutting it and getting it bleeding, which makes everything more slippery and difficult. Anyway ,I was ready and pushed it in. It went easily after getting through the tough urethral skin until it reached the outer skin on the top of my prick. Boy is that skin ever tough! It took a really hard push to get through that!. I looked at it and it was down and to the left of my mark. Damn! Should I try again? It looked so bad that I had no choice and there was no bleeding, so I went for it again.

I took the needle out and there was only a drop of blood on the top of my dick where the needle had exited. Great. I would try again. Since I had the experience of the first try it was easier to do it again because I knew that it didn't hurt while cutting through the flesh inside. It hurt only coming out and I could control that with my breathing. I did it again, taking greater can guiding the needle while inside, trying to come out on my mark. Again I missed, but not too badly. Should I try again? Was it worth it? Yes,it was obvious that it was off and although it would only be me who saw it, it wasn't good enough. Go for the third try!

Since I missed so easily and I wouldn't be able to tell if I really could hit the spot I decided to go from the top down. My problem was that I wanted to do a reverse and not an apadravya, although I would have an apadravya with the pa I already had. So I wanted to stop after coming through the urethra inside, and not carry through the urethra again and out the other side. I decided to try to put something into my urethra through my slit that would stop the needle and tell me where it was. The best I could was a plastic soda straw. I put it in. It hurt going in as the edge is too sharp and stiff. Now I used my backup piece of foam, although I didn't plan on coming out the bottom into the foam. I put the needle into my wood block so I could control it and did my breathing. I put my cock on the foam and centered the needle on my mark and felt it bite a little. I knew I could do this and so pressed on until it got through the tough outer skin on the top of my cock. I wanted to go straight into my prick so I didn't move anything but simply went further and further in, trying to feel the soda straw. When I wiggled it and thought that I was into the straw I was really though it and into my cock again. Now it did bleed. A lot more than before so I went into the bathtub because I knew it would bleed when I got the needle out of the urethra and the straw. I had to do this to get the jewelry in. I was putting in a 10G by 1 inch curved barbell. I tried to keep the barbell against the needle as I pushed the needle out. It was hard as the tough skin really grabs the needle as it tries to reverse direction and come out. I had a lot of bleeding; more than I've ever had before while the holes were empty, but it stopped when the jewelry went in. It looked like a lot of blood, especially when diluted with the water I had in the tub to keep the blood from staining the tub, but it was probably really very little.

The pain was minimal and it hurt really only while going in and coming out. While inside my glans I couldn't feel anything, certainly not anything painful. After three piercings through my dickhead I was really surprised that my cock didn't hurt. It really didn't!

Boy what a treat it was to see that metal coming out my dick. I couldn't believe it and I still can't two years later. I still take it out to look at it to see if it's real and it still thrills me. The sight does it for me. It doesn't add to any sensations while fucking or sucking, but it just looks so damn fantastic that I never get tired of looking at it. I would recommend an apadravya to everyone and have helped two guys already so if anyone wants help please feel free to contact me at ed_1943@hotmail.com.