About 8 months ago I wrote about my experiences of getting my first genital piercings. My article "Go For It" is still listed under the PA section.
At A Glance Author anonymous When N/A Location Florida My experience of a PA has really blossomed since then. Soon after my PA piercing, which healed very quickly and without incident, I began to think about stretching. Many of the articles which I had read discouraged it for at least 6 months or longer, but I was sure that I could do it without problems. (I don't recommend this for everyone, and it certainly shouldn't be tried if the piercing is not healed or if there is any pain at the piercing site). I purchased the tapers from an E-Bay listing and when they arrived, I was so excited that I had to try them out.
I found that the easiest way for me was by soaking for a while in my hot-tub and then gradually pushing through the taper. I did this several times until I could insert the CBR without difficulty. I would usually give myself about a week and a half to two week interval before I tried stretching down to the next larger size. Within the span of about three and a half months, I had stretched my PA to a 0G. There was just something sensual about having that thick chunk of metal hanging from my dick, not to mention how great I thought it looked.
As I continued to read postings on BME, I became intrigued with the stories and pictures that I had seen of Prince's Wands. Most of the stories dealt with home-made products, but I knew I wasn't creative in that way. I found a website at www.geocities.com/oldguypa/princeswands.html and knew immediately that this is what I wanted to get, the only problem was trying to decide which style.
I e-mailed John the Wand Man several times and he answered all of my questions. I decided to purchase a 2" wand length and a flat head bead since this would almost be flush on the underside of my dick. I also chose a 1/2" front ball with a slave ring attached. The measurements were the hardest part for me, but once I sent them to John, he looked them over and then called me to question my measurement on the pin length. It turns out that he was right to question me because I had indeed measured it wrong. It was great to know that he could immediately spot when something appeared out of line. When it came to the internal diameter, John was just as exacting. He questioned whether 5/16 might be a better fit than 3/8". Just to make sure that I would be happy with the internal diameter, he sent me samples in each size. Now that all of the measurements were in place, he told me that he would start making it and that I should have it in several days. I had one more request of him, and it was to make a second wand barrel with all of the same measurements as the smaller 2" one, but to make this one 4" in length, so that I could use them interchangeably.
Within about a week, my wands arrived. I removed my CBR and cleaned the wands which looked perfect to me. I inserted the wand into the head of my dick and it moved in so smoothly. The hardest part was trying to find the hole in the wand which would attach to the underside of my dick. With a little bit of patience, I did succeed, and tried it several more times until I could do it without problems.
What a sensation I felt in my dick. And the same was true for the 4" wand. I thought that I might have problems sitting or bending, but none what-so-ever. The greatest benefit from my wand has been the fact that I can now stand once again and pee without spraying or dripping all over. I just unscrew the end ball (usually before I go into a public bathroom)and since the wand does not extend further than the end of my dick, I can stand at a urinal and piss with the rest of the gang with no one the wiser. My stream is not as forceful as if I were not pierced, but it's an easy trade off. The same is true when I cum. I may not get the force or distance, but have had absolutely no complaints from partners, in fact, just the opposite -- it's also a turn-on for them.
I really enjoy my new Wand and highly recommend John. His craftsmanship is great, and compared to other pieces of jewelry which I have purchased, a real bargain.
I currently have my PA at 0G, scrotal piercing at 8G and have substituted my frenum ladder for a single frenum at 2G with a flesh tunnel through which other weights can be attached.
Not too bad for an 'old man' who started piercing later in life.